DIY Corner Desk

The first room I was ecstatic to do in our home was the office on the first floor. Within a month of owning our house, I had stripped the wall paper and painted the walls. Long story short, we wanted this room to be an office for both my husband and myself and an extra TV room. So we needed two desks, a couch and a TV. With our new homeowner spirit, we quickly went out shopping for desks. Well guess what? Desks are freaking expensive!! Plus, I couldn’t find what Mark and I were imagining in our heads. With all the initial enthusiasm squashed, this room paid the price and sat empty for a while.

I only used the Ikea tops to help plan my layout.

About a year after we bought the house I decided to try my hands at my first DIY/Ikea hack in an attempt to get this office going. I re-did my college Ikea desk and loved it, so I went to the scratch and dent section at Ikea and bought two more table tops (which I didn’t wind up using) for about $20 to make an “L” shaped desk as the second desk. Over the next 6 months, my ideas kept changing and I found some inspiration on Pinterest. Finally, I stumbled across free desk plans on Instagram. Thank you Rogue Engineer!  With the plans, the “L” shape, my Pinterest inspiration, and some pallets, I was finally ready to get started.
I started to drill my pocket holes and assemble the desk top. This turned out to be the most difficult part of the whole project. At this point, I had never drilled a pocket hole and I went slowly. Partially due to my inexperience, my stagger as I go technique, and the fact I had to finish each pocket hole by hand because I did not have a long enough drill bit, this part took several days spread over weeks. What a newb!IMG_1022

Finally, I was ready to buy the wood for the legs and move on from the top!  When I was having the guy at HomeDepot cut the legs, they seemed short, you know, to me, the super not experienced desk maker. I added an inch or two, figured I would double check it and could cut them down later if needed. In the end, I left the legs longer, which would come back to bite me. . . . The legs came together pretty quickly, despite the fact I only have a single Kreg Jig mini. I used both the plans and tips from Rogue Engineer and Shanty2Chic. After some mistakes I made on another project, I understood how to adjust the Kreg Jig to work for different widths of wood. I was super proud of myself with these legs!IMG_1606

I assembled everything another day and had my husband help me align the top to the frame better. Because I adjusted the plans to make this a corner desk, I kind of just made up where to place the under supports and prayed everything would work in the end. I sanded it all and moved it into the back sun room to stain. IMG_1667IMG_1616


I used a combination of Minwax’s Jacobean, Espresso, and Provincial stains and weathered it with some paint samples I had lying around. Then sealed the whole thing with Varathane’s Triple Thick Polyurethane.IMG_1707

When the time finally came to move it into the office, the desk did not fit! For the record, I did measure the door we had to fit through and did some quick measuring in my head, thought it would work. I was wrong. Some time, sweat, and removed door jamb later, the desk was in!

DIY Corner Desk

I just love this desk! From plan to completion this was a long time coming—more than 3 months!! And if you count all the Pinterest searching, way more than 3 months! But boy, was it worth it! Now, if we ever move, the desk stays!

Time Line:

  • 11/15-4/15: Pinterest searching
  • 4/19/15: Planned desk design
  • 4/26/15: Started pocket holes for the top
  • 5/10/15: Bought wood for legs and frame
  • 5/11/15: Assembled the legs and framed in the top
  • 5/16/15: Attached the desk top to the legs
  • 5/17/15: Sanded and stained the desk
  • 5/18/15: Weathered the wood with paint
  • 5/20/15: Stained the wood a second time
  • 6/7/15: Sealed the desk
  • 6/14/15: Moved the desk in the office
  • 7/14/15: Took finished pictures
  • 8/25/15: Blogged

DIY Pallet Frames

So, you may have gathered from that last post that I tend to be a messy person. And it’s true. (Must maintain the neatness.) What you may not have figured out is that despite being messy, I can also be very OCD-ish. It presents in very peculiar ways like creating a graphic for work, or where to place the return address on an envelop, even what width/color washi tape is best in my bullet journal. (If you don’t know what a bullet journal is, you need to!) This OCD side of me usually means I develop a minor fear of failure. To avoid mistakes I research the heck out what I want to do. I have put hours into reading how to install baseboards, stain furniture, strip furniture, and hang art.

Now this last topic still gets me. My minor fear of hanging art the wrong way has grown slightly. I think what stops me is knowing that the art and photos I hang may change sooner rather than later. With babies on the mind and more vacations planned, I know wedding photos and twenties fun aren’t going to cut it forever. I know, I know, you just swap out pictures, add more, change it up. That’s the logical part of my brain. But, if you know me, I need things settled a certain way in my mind before I’m good with something. So, I have devised the perfect plan to inspire me to create a beautiful display of art in the house. I call it the pallet refrigerator door (just made that up).

I got my hands on some pallets and dissembled them (yes, I watched 3+ videos on disassembling pallets). It wasn’t until I saw the plain boards that I thought, this would be great for short-term photos!


I printed out 4×4 pictures so that I could size the boards, sanded them, then cut them down to size!  One long pallet could fit 5 prints, so I decided to cut the boards to fit two photos and three photos.IMG_0806







Next, I stained, dry brushed, stained again, sealed, and applied the hardware!  (This all took place over the course of a few days!)  I had the remains of two tiny Minwax stain cans left, so I mixed two to have enough.




My paint was just left over sample paints from last winter.  I started with a white, then added two extra colors with purple and green undertones.  I re- sanded down to my liking and stained over the paint to get the weathered look I was going for.

Now, to hang them . . . the hardest part!

The finished project, on the wall!  (I need to make one more to fill the wall out better.)  Do you like?